Mechanical Seals Manufacturer In China

Danish Energy Agency released the latest data show that in 2009, the Danish wind power to restore growth and full-year land-based wind power production increased by 97 megawatts (MW), the highest since 2002, offshore wind power production increased by 237 megawatt (MW).
According to the Danish Energy Agency statistics, the Danish wind turbines accounts for [...]

Renewable energy is receiving increasing attention as the world attaches importance to the environmental protection and energy conservation. Among all the types of green energy, Wind power generation is a generation mode which has relatively mature technology and prospect for large-scale development and commercial exploitation. Hence it gains increasing concern and has broad development prospect.
In [...]

30KW wind generator specifications Type: 3 Blade Upwind Rated output: 360V DC Rated current: 83DCA Rotor Diameter: 10 m Start-up Wind Speed: 2.5 m/s (5.6 mph) Cut-in Wind Speed: 2.5m/s (6.7mph) Rated Wind Speed: 12.5m/s (26.8mph) Cut-out wind speed: 20m/s Save wind speed: 45m/s Rated Power: 30k Watts Maximum Power: 38 k Watts Cut-Out Wind Speed: 15m/s(33.5mph) Timing manner: Automatically adjust the Windward angle: 6° Overspeed Protection: AutoFurl Temperature Range: -40 [...]

Hummer H8.0-10000w horizontal wind turbines has the following features:
A. Swift start-up at low wind speed
B. Low energy consumption with high output efficiency generator
C.Reliable protection with Hummer wind-solar controlling system or Hummer grid-tied inverter .
D East to install with long life design
Specification of H8.0-100000 horizontal wind turbine :

Rated Output (W)

10000

Max Output

15000

Charge Voltage(V)

DC 300V

Numbers of Blade

3

Blade Material

GRP

Blade [...]

4) hummer wind turbines Nose Cone Protection Cover

Nose cone is made of reinforced aluminum alloy.
hummer wind generators Nose Cone Protection Cover locates in front of blades to reduce the wind resistance. The generator is enclosed in the nose cone, which is favorable for heat dispersion.
Protection cover’s made of [...]

Tower not only supports the wind turbine but also determines how good the wind is .Usually ,the higher the tower is ,the faster the wind blows thus more energy grasped .And the quality of the tower also effect the usage of the whole system to some extent .
We can offer guys tower ,free standing tower and hydraulic tower [...]

We use 3 independent non-fumigated and non-distilled veneers for wind turbines . Just like in the picture attached .
For example : 2KW Product Size： 1.925*0.36*0.24=0.16632m3 0.44*0.38*0.36=0.060192 m3 0.53*0.47*0.36=0.089676 m3 Total Volume:0.316188 m3 Net Weight：0.065ton
Gross Weight：0.0795ton
1KW Packing Size: 1.7*0.315*0.24=0.12852 m3 0.405*0.38*0.36=0.055404 m3 0.53*0.47*0.36=0.089676 m3 Total Volume：0.2736 m3 Net Weight：0.052ton Gross Weight：0.066ton
500W,1000W Product Size：1.29*0.26*0.16=0.053664m3 0.675*0.28*0.26=0.04914m3 0.535*0.47*0.21=0.0528045m3 Total Volume：0.3017685m3 [...]