Mechanical Seals Manufacturer In China

Windmill generator air energy storage technology for steady

Offset vertical axis wind turbine windmill energy storage technology can be applied, such as windmills and windmill air energy storage technologies for water technology,Windmill generator air energy storage technology for steady output power is not the shortcomings of research and development in wind turbine generators acceptance of windmill power before the addition of compressed air energy storage technology, the output of mechanical rotating windmill can be converted into compressed air storage, according to the time people need to use compressed air to drive the motor speed control on the amount of voltage generator to generate electricity, can effectively use wind energy.
Vertical axis wind turbine to the wind power axle, direct drive air compressor to work, eliminating the need for yaw control system, air compressor can be directly connected to the windmill power tower, the compressed air fed to the tower in the barrel for use. For large windmill air compressor can be installed on the ground, through the connecting rod connecting the vertical axis wind turbine power, compressed air stored in pressure in the tank, or stored in deep underground, the pneumatic motor in accordance with demand through mechanical, production or sent directly needs of electricity, can also be used for power generation. Can of compressed air through the motor-driven mechanical energy directly applied to the production, reduce intermediate links, the direct use of wind energy resources.
1, windmill windmill energy storage technology can transform the unsteady mechanical energy into compressed air, compressed air and build this store. It under the control of the human wind turbines manufacturers remains stable for a longer time in traffic, or the role of advanced technology, stable quality of the generator mechanical rotary power source for power generation, to more human and sustainable clean energy. Windmill energy storage technology uses compressed air, compressed air pump using ring skateboard compressed air storage, slide ring pump reverse effect, so that pump air through the ring into rotary power slide through the generator can be power at any time, you can also use compressed air and pneumatic machinery used directly.
2, windmill energy storage technology, will reduce subsequent equipment windmill windmill power provided by the size and stability requirements. Thus windmill from time taking the wind paddle on the complex pitch devices disposable energy, and windmill in high winds when the kill vehicle to measure abandoned to completely release the Wind propeller windmill absorption conversion of wind energy capacity, the windmill wind paddle free play of its own functions, for wind turbine blade further tap the potential of laying a good foundation.
3, windmill energy storage technology, may be reduced by the existing wind turbine gear box and generator set in the cabin of the windmill issue, thereby reducing the wind turbine installation in the cabin lift lifting up the difficulty. No need to set the regulator, controller, capacitors, storage battery, inverter and other electrical equipment to reduce maintenance costs, improve wind power generation efficiency can be greatly reduced cost of electricity.

Vestas plans to 2015 operating income of 15 billion euros

Danish wind turbine maker Vestas has announced press release, due to deteriorating global economic environment, Vestas announced in 2009 will give the 2015 earnings forecast.
According to the expectations, Vestas plans to 2015 operating income of 15 billion euros, pre-tax profit margin of 15 percent, but Vestas 2011 performance is not satisfactory, the company’s stock price at the Copenhagen Stock Exchange the past six months has fallen by 50%.
In addition, Vestas third quarter of 2011 financial statement, Vestas third quarter pre-tax loss of € 92 million, compared with pre-tax profit of 2.71 billion euros; operating income of 1.34 billion euros, down 30.2%. Vestas has decided to abandon its 2009 earnings forecast announced in 2015.
Vestas Chairman Bent – Eric – Carlson said, because the worsening global economic outlook, the board supports Vestas is expected to give up profits in 2015, but the board always believe that windmill power has attracted a long-term force investment.
Vestas chief executive Dieter Leeuw – Engel also announced that Vestas will be released in February 2012 full-year 2011 earnings, while the introduction of the new organizational structure, he also said that the new organizational structure must be more customer-oriented and scalable, so as to quickly and effectively to adjust to market fluctuations in addition to adjusting the organizational structure, the company needed to significantly reduce costs.
Analysts here believe that the issue of layoffs signal Vestas, massive layoffs in 2012, headquartered in Denmark, Vestas began wind turbines manufacturers in 1979, wind turbines, is currently the world’s largest wind generator  manufacturer.

wind turbine generator Vancouver-based

High above the corner of Georgia and Hornby in a downtown Vancouver office tower, Jeffrey Ciachurski paces with a passion trying to mask his anger at a rival’s bid to take over his company.

“It’s an insult to the people who built this company and the shareholders who believe in its future,” said Ciachurski, whose Western Wind Energy (TSXV: WND) was the target of a takeover by Ontario-based Algonquin Power and Utilities Corp recently.

The unsolicited Algonquin bid of $2.50 in cash or cash and shares was nearly double the previous market price for the wind turbine generator Vancouver-based company but only half of what independent consultants have estimated Western Wind’s value to be.

“It was a lowball offer and we advised our shareholders to ignore it . . . we said thanks but no thanks,” said Ciachurski, who is now reigning in large shareholders of his company with lucrative propositions so they won’t fall prey to private offers for their stake in Western Wind.

As the war of news releases on who pulled the plug on the deal goes on between Algonquin Power and Western Wind Energy, one thing is clear – it won’t be the last time mega-renewable energy wind turbines manufacturers companies are going to be knocking on Ciachurski’s door.

Unlike many wind-energy companies in Canada that are in a tailspin, Western Wind is riding the proverbial winds of change all the way to the bank. Western Wind has two wind turbines farms with a total capacity of 34.5 megawatts operating in California, a 10.5-megawatt wind and solar project in Arizona and is developing a project in Puerto Rico.

Later this month, i t will bring online its 120-megawatt Windstar Wind Farm in Tehachapi, Calif. That deal, which will be able to power 36,000 homes, has been sweetened with Western Wind windmill generator securing a U.S. government cash grant totalling $108 million US.

All of this translates to a homegrown company with humble beginnings boasting $340 million of wind assets and a revenue stream in 2012 of $51 million.

Components for wind turbines testing

Recently, the North Wind Power Co., Experimental Station car passed the China Classification Society certification company (CCS) of the fan detection certification assessment, marking the north wind power test station vehicles equipped with the China Classification Society certification as a third party certification, co-institutions within the industry and its components for wind turbines testing and certification of qualifications.

North wind test station car was built in March 2010, is the North China to invest 30 million cars built MW wind turbine testing facility, mainly engaged in 1.5MW, 2MW and 3MW wind turbine generator and component quality testing and certification testing, the main test items including speeding test, overload test, the low voltage ride through testing.

Since March, 2010, the North Wind Experiment Station car with the China Electric Power Research Institute has completed a number of wind power converter testing and certification work, access to industry experts alike. North wind test station vehicles will be passed this evaluation as an opportunity to greater expertise, more rigorous attitude, better quality services for the wind power generator industry to make greater contributions.

wind turbines testing and certification of qualifications

Recently, the North Wind Power Co., Experimental Station car passed the China Classification Society certification company (CCS) of the fan detection certification assessment, marking the north wind power test station vehicles equipped with the China Classification Society certification as a third party certification, co-institutions within the industry and its components for wind turbines testing and certification of qualifications.

North wind test station car was built in March 2010, is the North China to invest 30 million cars built MW wind turbine testing facility, mainly engaged in 1.5MW, 2MW and 3MW wind turbine generator and component quality testing and certification testing, the main test items including speeding test, overload test, the low voltage ride through testing.

Since March, 2010, the North Wind Experiment Station car with the China Electric Power Research Institute has completed a number of wind power converter testing and certification work, access to industry experts alike. North wind test station vehicles will be passed this evaluation as an opportunity to greater expertise, more rigorous attitude, better quality services for the wind power generator industry to make greater contributions.

offshore wind turbine generator units are completed in September lifti

Learned from Sinovel by Sinovel self-developed China’s first 6MW wind turbines on the Taiwan Strait in Sheyang County, Jiangsu Province port industrial zone to complete lifting of the lifting unit is the maximum current to achieve megawatt units.

In addition, according to Sinovel relevant sources, their own production, and has a fully independent intellectual property rights of first 5MW offshore wind turbine generator units are completed in September lifting.

Not only that, the reporter was also informed that on October 20, Germanischer Lloyd (GL) also to the SL1500/82 Sinovel issued Class A design unit certification, this is the first domestic wind power equipment manufacturing world authority enterprises (GL) certification.

Sinovel the design certified by GL models SL1500/82 unit capacity 1.5MW. According to Sinovel Campbell, senior vice president, introduced, in September 2009, Sinovel with Germanischer Lloyd (GL) signed a wind turbine measurement contract. Access to the certificate that SL1500 units in the design, procurement, production, manufacturing, commissioning and trial run, which adhere to the requirements of GL. At the same time, through the certification marks Sinovel product technical performance, especially in the domestic wind power products received international certification authority recognition.

Not only that, the wind power industry researchers also said that the international certification authority for Sinovel overseas expansion strategy to add weight to further enhance Sinovel layout competitiveness overseas.

It is understood, Sinovel in the United States, Canada, Spain, Australia, South America and other countries to establish subsidiaries. Since 2011, Sinovel further accelerate the pace of internationalization, September, Sinovel with the local Power Development Corporation Desenvix Brazil signed a contract for the Sergipe in Brazil, a 34.5MW wind farm area to provide 23 sets of SL1500 / 82 wind turbine.

Prior to July 15, Sinovel just with a new international energy developer Mainstream Renewable Power signed a cooperation agreement, both sides agreed the next five years to develop in Ireland, construction, operation 1000MW of wind power projects, provided by the Sinovel wind turbine, small wind turbine manufacturer in China hit a cooperative is the largest single overseas.

Hebei’s first 3.0 MW offshore wind turbines off the assembly line

Recently, Hebei Province’s first high-speed permanent magnet-type 3.0 MW offshore wind turbines in Baoding Tianwei Wind Power Technology Co., Ltd. offline. Which fan for coastal high humidity, high salt spray, rain, thunderstorms and more operating environment, the anti-corrosion, anti-salt spray, seal, and has taken a special dehumidification technology designed to solve the problem of low voltage ride-through in technology to maintain the advanced nature.

Baoding Tianwei Group as a national commitment to science and technology support projects, the wind generators have independent intellectual property rights, dual-use land and sea fan off the assembly line, and equipment to accelerate the localization of our large fan, driven by the development of offshore small wind turbines industry is important.

With China’s oceanic windmill power supply expected to hit

With China’s oceanic windmill  power supply expected to hit 30 gigawatts by 2020, top domestic producer Dongfang Turbine Co Ltd is moving to meet the need through mass production of turbines whose blades span 140 meters.

Wang Bing, deputy director of the wind power division of the State-owned enterprise, told the China New Energy International Summit 2011 in Chengdu that domestic firms can now commercially wind turbines manufacture units that produce 7.5 magawatts of electricity an hour.

But “the 10 magawatt level is not feasible in China with current investment”, he said.

“The 7.5 megawatt wind turbine for ocean wind power generators projects is the market that global producers put hefty investment into,” he noted, but declined to release Dongfang Turbine’s total spending for R&D and production of the units.

Market insiders say the cost of a single such new unit could surpass 26 million yuan, but then gradually become more affordable due to mass production.

Wang said the company’s global competitors now include New York-based Windtech International, which has announced plans for an ambitious 10 megawatt unit, and California’s Clipper Windpower, whose 7.5 megawatt wind turbine will soon be put into operation.

Dongfang’s challenge is now “looking to the future – the 10 megawatt unit is not difficult to achieve if investment is sufficient” for the sophisticated research needed, Wang said.

Company statistics show annual new installed wind power capacity using Dongfang units is nearly 100 million kW.

By the end of last year, the company had 3,000 units in operation at 72 wind farms in China.

The value of the company’s industrial output hit 20 million yuan last year.

Figures from the Global Wind Energy Council say China’s investment in wind generators rose 28 percent last year to 49.8 billion yuan. Total inland and coastal installed capacity reached 44.7 gigawatts, the most in the world.

According to Li Jianchun, secretary general of the Wind Power Industry Association of the Inner Mongolia autonomous region, the region expects wind power to account for 20 percent of its total power generation during the 12th Five-Year Plan period

Wind power generators project is Datang Shan Hunan branch

Wind power generators project is Datang Shan Hunan branch of the first step to enter the field of wind power, is following the Chenzhou, Hunan Province, Yang Tianhu second wind after the start of wind power projects, to improve the Hunan power structure and the promotion of clean and renewable energy developmentimportant.

Wind power project located in the Nanshan step Miao Autonomous County town south of the Triangle Ranch Ping Shan to the north row of dragon mountain, about 20 km north-south stretching east-west zone average width of 7 km, with an average altitude of about 1800 meters, the planned total area of ​​100 sites square kilometers, the planned capacity of 180,000 kilowatts, a total investment of $ 1.7 billion, Hunan Province, the largest windmill power project. Nanshan first phase of wind power projects installed unit capacity of 2000 kilowatts of wind turbines manufacturers 24 units, 1,500 kilowatts of wind turbine 1, with a total installed capacity of 49,500 kilowatts, the annual generation capacity of up to 89,886,000 kwh, annual savings26,400 tons of standard coal, reduce emissions of 891 cubic meters of various pollutants.

In recent years, with expanding economic scale, Hunan Province, by the second production capacity of energy supply into a shortage of energy resources, the thermal power industry experienced declining utilization hours, the dual challenges of rising coal prices. To address the current difficulties, to further improve the power structure, Hunan Branch, efforts to increase hydropower, home wind generator and other clean energy project development. Nanshan wind power project is the company’s first wind power project, the company also services the local economic and social development of the new battlefield.

Wind turbines controller can measure wind speed

Wind turbines of controller system can measure wind speed, wind direction, the generator temperature, speed, current, voltage, yaw parameters such as limit switch, according to the value set by the user controller, automatic control of wind turbines to follow suit, yaw, unloading , brakes, untwisting and other sports. Controller can automatically detect wind speed, wind direction sensor failure, automatically in the event of failure to protect a wind turbine control. Wind turbine controller for wind turbine automatic control.
small Wind turbine controller is a PLC controller, HMI, computer software has three parts. PLC controller installed in the strong electric cabinet, is a core part of system control. PLC and HMI using RS485 bus connection, human-computer interface installed on the client, used to display wind turbine wind speed, wind direction, voltage, current, speed and other measurement parameters, and yaw, unloading, braking and other control of the state, man-machine interface is also used for manual control of wind generators. Man-machine interface with RS232 communication serial, USB and RJ45 network interface for communication with the host computer, host computer can display wind turbines running, and set the controller’s control parameters. Man-machine interface through the network interface, you can access the Internet directly to the wind turbine, wind turbine network to achieve remote monitoring.
Wind turbine controller has battery reverse polarity protection, output short circuit protection, protection of damage to the battery open circuit protection (to avoid the fan idling), wind automatic unloading, over-voltage auto-brake, make no use of low (before the battery is not full, the controller close to their own consumption zero), special circumstances, manual brake function

第 3 页,共 24 页123451020...Last »